2018 Toyota Corolla Front Bumper Replacement

Fit 20172018 Toyota Corolla SE XSE Front Bumper Lower Grille Grill
Fit 20172018 Toyota Corolla SE XSE Front Bumper Lower Grille Grill from www.ebay.com


The Toyota Corolla is a popular and reliable compact car that has been on the market for many years. However, accidents happen, and sometimes the front bumper may need to be replaced. In this article, we will discuss the process of replacing the front bumper on a 2018 Toyota Corolla.

1. Assess the Damage

The first step in replacing the front bumper is to assess the extent of the damage. Inspect the bumper for any cracks, dents, or other visible signs of damage. This will help you determine whether a replacement is necessary or if repairs can be made.

2. Gather the Necessary Tools and Parts

Before starting the replacement process, gather all the necessary tools and parts. You will need a socket set, a screwdriver, a trim panel removal tool, a plastic pry tool, and a new front bumper. Make sure you have all the required parts and tools before proceeding.

3. Disconnect the Battery

As a safety precaution, it is important to disconnect the battery before starting any work on the front bumper. This will prevent any electrical shocks or damage to the vehicle’s electrical system.

4. Remove the Old Bumper

Start by removing the screws and clips that hold the front bumper in place. Use a screwdriver or socket set to remove these fasteners. Once all the fasteners are removed, gently pull the bumper away from the vehicle.

5. Disconnect Electrical Connections

Once the bumper is removed, you will need to disconnect any electrical connections, such as fog lights or parking sensors. Carefully unplug these connections to avoid any damage.

6. Install the New Bumper

Take the new front bumper and align it with the mounting points on the vehicle. Carefully push the bumper into place, making sure it is securely fastened. Reconnect any electrical connections that were disconnected earlier.

7. Secure the Bumper

Once the new bumper is in place, secure it using the screws and clips that were removed earlier. Make sure all the fasteners are tightened properly to ensure a secure fit.

8. Reconnect the Battery

After the bumper is securely installed, reconnect the battery to restore power to the vehicle. Double-check all electrical connections to ensure everything is properly connected.

9. Test the Bumper

Once the replacement is complete, test the front bumper to ensure it is functioning properly. Check that all lights are working and that the bumper is securely attached to the vehicle.

10. Final Inspection

Finally, inspect the entire front bumper to ensure it is aligned correctly and there are no visible signs of damage. Take the vehicle for a short drive to ensure everything is working as it should.

By following these steps, you can successfully replace the front bumper on a 2018 Toyota Corolla. However, if you are not confident in your abilities, it is always recommended to seek professional assistance to ensure the job is done correctly.