2018 Mercedes C Class Rear Brake Pad Replacement

Genuine MercedesBenz W203 CClass Saloon/Est REAR Brake Discs & Pads
Genuine MercedesBenz W203 CClass Saloon/Est REAR Brake Discs & Pads from www.ebay.co.uk

2018 Mercedes C Class Rear Brake Pad Replacement


If you own a 2018 Mercedes C Class and are experiencing issues with your rear brake pads, it may be time for a replacement. Brake pads are an essential component of your vehicle’s braking system, and ensuring they are in good condition is crucial for your safety on the road. In this article, we will guide you through the process of replacing the rear brake pads on your 2018 Mercedes C Class.

Step 1: Gather the Necessary Tools

Before you begin the replacement process, make sure you have all the required tools. These typically include a lug wrench, a jack, jack stands, a C-clamp, a socket set, a torque wrench, and a brake pad spreader tool.

Step 2: Prepare Your Vehicle

Park your Mercedes C Class on a level surface and engage the parking brake. Loosen the lug nuts on the rear wheels, but do not remove them just yet. Place the jack under the vehicle’s designated lifting point and raise it until the rear wheels are off the ground. Secure the vehicle with jack stands for added safety.

Step 3: Remove the Old Brake Pads

Locate the brake caliper on each rear wheel. Remove the bolts holding the caliper in place using a socket wrench. Once the caliper is loose, carefully lift it off the brake rotor. Slide out the old brake pads and inspect them for any signs of excessive wear or damage.

Step 4: Install the New Brake Pads

Apply a thin layer of brake grease to the metal backing of the new brake pads. This will help reduce noise and vibrations. Insert the new pads into the caliper bracket and press them firmly against the rotor. Make sure the pads are aligned correctly and secured in place.

Step 5: Reassemble and Test

Carefully lower the brake caliper back onto the rotor and tighten the bolts using a torque wrench. Double-check all connections and ensure everything is properly aligned. Repeat the process for the other rear wheel. Once complete, pump the brake pedal a few times to restore pressure to the brake system.

Step 6: Final Checks

Lower your vehicle from the jack stands and tighten the lug nuts on both rear wheels. Give the brake pedal a few more pumps to ensure it feels firm. Take your Mercedes C Class for a test drive in a safe area to ensure the new brake pads are working correctly.


Replacing the rear brake pads on your 2018 Mercedes C Class is a relatively straightforward process that can be done at home with the right tools and some basic mechanical knowledge. However, if you are unsure or uncomfortable performing the replacement yourself, it is always recommended to seek professional assistance. Properly functioning brake pads are essential for your safety on the road, so make sure to inspect and replace them as necessary.